< Go Back
Heywind - wind turbine
The Heywind wind turbine is for grid-connection and heating support, the LV - version is for the battery charge. They work very effectively despite their simple structure. Particularly noteworthy is their very good stafing behavior and their quiet running, thus the plant can be established in populated areas without issue.
Grid connection: For an effective network group one or two net inverters are necessary. An inverter works at low wind velocities, the second inverter with a steeper characteristic scolded itself at high wind velocities in addition. The network group can be switched by a change over switch to heating enterprise manually. When the grid connection fails, it switches automatically to heating support. The Heywind wind turbine continues working in the face of high wind velocities in a tilted 'helicopter' position. They are almost maintenance-free.
Security: If the number of revolutions of the plant becomes too high, e.g. in the case of power failure, it either switches to heating or the wind turbine is braked until it stops rotating completely.
Click here to be taken to the Heywind Wind Turbines home page!
Turbines Technical information:
You can choose the the colour!
Heywind 2.5Kw |
Heywind 3.5Kw |
Heywind 5Kw |
|
Price |
from €15000,-- incl. VAT |
from €16900,-- incl. VAT |
from €19900,-- incl. VAT |
Price includes |
1 pc. Heywind wind turbine, 1 pc. Tower 12 m incl. steel for the foundations, 1 pc. control box to the grid connection incl. set of cables and load resistance, net inverter windy boy incl. cable. |
||
Rotor |
3 CFRP- rotor blades, 3.0m stall controls |
3 CFRP- rotor blades, 3.5m stall controls |
4.4m |
Generator |
3- phase permanent magnet synchonous generator without gear |
||
Voltage |
400 V; with inverter 230V AC |
400 V; with inverter 230V AC |
400V |
Power |
2500W |
3500W |
5000W |
Cut-in wind speed |
3m/s |
||
Rated wind speed |
11m/s |
||
Storm protection |
Tilt in helicopter position, brake reisters and generator short-circuit |
||
Azimuth storage |
2 sealed ball bearings, continuously lubricated |
||
Current derivative |
Slip rings, carbon brush |
Slip rings, carbon brush |
Slip rings, doubled carbon brush |
Weight |
approx. 65kg |
approx. 70kg |
approx. 110kg |
Accessories:
- Control box to the grid connection incl. set of cables and load resistance.
- Control box for heating / prepares f. grid connection.
- Hybrid control box for heating and grid connection.
- Charge controller 48 V with display resistance box, 4-steps.
- Net inverter Windy Boy 3300 inclusive cable.
- Net inverter Windy Boy 3800 inclusive cable.
- Net inverter Windy Boy 5000 inclusive cable.
- Net inverter Aeocon 4000 incl. Resistance box and switch box.
- Net inverter Aeocon 4600 incl. Resistance box and switch box.
- Screw-in heating element ERCH 65 6000 W.
- Masts.
< Go Back